Transom work continues

Removed the clamps, sanded and prepped the 4th layer. I will inject epoxy into all the holes before adding the final layer of marine plywood.

I cut out the final layer of wood today. I will be installing it soon.

I will be tabbing in the transom with multiple layers of 1708 Biaxial Fiberglass. The widest might be 8inches wide. I only had 5inches cleared on the bottom so today I increased it to about 9inches. Tabbing in the transom to the sides and bottom of the hull gives the transom strength. This is a before pic
.

This is after.